Visor 90° aluminium corner joiner 200 x 200 x 1.2mm in mill, fits on top of the friction insert at 90° corners for handrail rigidity.

Product details

Visor aluminium 90° corner joiner in mill finish, 200 x 200 x 1.2mm. Used at 90° corner joins of the undercapping plate (VIS-4000-PLATE-B/W/M) to provide rigidity at the corner. Fits on top of the friction insert (VIS-3050-INS-2PK) and is installed as a final step - just before snapping on the rectangular handrail (VIS-6100-HRAIL-B/W/M). To fit, remove the four 14g x 50mm panhead screws from the top of the mitred adjacent panels (two from each panel), drill 4 x 7mm holes in the joiner aligning with the central baluster screw flute positions, then refit the screws through the joiner to engage the balusters through the friction insert. Cut the handrail at a mitre to suit the undercapping and finish with two short corner sections that clip over the joiner. Install per the Visor fabrication guide Appendix 2 (Option 2); install per AS/NZS 1170, AS/NZS 1664.1 and NCC Volume 2. Note: the face-mount and deck-mount bases themselves do NOT require this joiner - mitre cut and position end-to-end.