Visor 63 x 20mm aluminium wall/post bracket in matt black, mechanically fixes the undercapping plate to a wall or post for handrail termination.

Product details

Visor 63 x 20mm aluminium wall/post bracket in matt black powder-coated finish, 8mm thick, with 4 x 5.5mm-diameter countersunk holes. Mechanically fixes to the screw flutes in the undercapping plate (VIS-4000-PLATE-B) and then fixes off to the wall or post - used where the Visor handrail terminates directly into an existing wall or post (rather than ending in mid-air or stopping offset). Once installed, the 70 x 23mm Visor handrail (VIS-6100-HRAIL-B) snaps over the bracket giving a seamless terminating fixing with no visible bracket. Per the install guide, cut the undercapping and friction insert 8mm shorter at the bracket location, fix the bracket to the undercapping with two 8g x 25mm countersunk screws (VIS-SCR-CSK-50PK-B), then notch/trim the friction insert as needed for screw access to the wall/post fixings. Wall/post fixings are not supplied - specify per the substrate. Install per the Visor fabrication guide Appendix 1 (Option 2); install per AS/NZS 1170, AS/NZS 1664.1 and NCC Volume 2. Made from extruded aluminium. Available in matt black, pearl matt white (VIS-WB-W) and mill (VIS-WB-M).